Cart: 0 item(s) - £0.00

Aqualux Florenta Quadrant Steam Shower Enclosure Cabin 900mm x 900mm

Product Code : FEN0661AQU
Product Brand : Aqualux
Product Condition:   New
Add Pressure Equalising Valve
Add ShowerGuard Glass Protection
Add iShower - CD/mp3/iPod Audio Transmitter
Water Softeners
Send to a friend

Aqualux Florenta Quadrant Steam Shower Enclosure Cabin 900mm x 900mm

The Aqualux Florenta Quadrant Steam Shower Cabin Includes 4 body massage jets to refresh and relax you, whilst the steam will nourish and detoxify your skin to leave you with a healthy glow and feeling of wellbeing.

Product Features

Includes roof, walls, shower tray and drainage kit

  • Steam Generator
  • 3KW Steam Generator
  • Overhead monsoon rain shower
  • Electronic control pad
  • Built in lighting
  • Built in radio & speaker
  • Built in Thermostatic Shower Mixer
  • 4 Body Hydro Jets
  • Hand Held Shower
  • Sliding doors
  • Tempered Glass
  • Includes Quadrant shower tray
  • Extractor Fan
  • Free Standard Fitting Kit - Comprises of: 2 x standard 900mm long braided hoses and standard shower cabin waste trap and flexi waste hose.
  • iShower Compatible - If Ordered allows you to transmit audio from a phone or mp3 device not Included as standard but is an optional extra, please see options.  If ordered with your steam shower you can save £10.
  • Optional Water Softener - Little Plumber is a compact, computerised electronic water softener which will descale your existing system, prevent new scale forming and save you money from the moment it is installed. Your water will also feel softer so no need for a traditional water softener.
  • Optional PEV - Pressure Equalising Valve is designed to Balance the hot & cold water pressures for use with Combi Boilers to ensure your shower is protected against un-balanced hot & cold water pressures.  Check Here for PEV Product Info
    Optional Showerguard - Shower guard will protect your new investment permanently from limescale.  It also makes cleaning a lot easier and is water resistant making it easier to clean the glass, Any non-abrasive cleaner can be used Check Here for Showerguard Product Info

Backed Up With a Comprehensive 2 Year Warranty
Fully European CE Approved

Dimensions: 900mm * 900mm * 2200MM

View Fitting InstructionsPlease Click Here To Download the Instruction Manual

Operates at Pressures of 2 - 4 Bar

Installation guidelines for

Aqualux Steam Showers


  • Working voltage: 220 - 240 Volts
  • Power consumption: 2500 - 3800 Watts
  • Maximum current draw: 15.8 - 17.3 Amps
  • Water consumption: 900 - 1200 litres per hour
  • Working water pressure of steam generator: 0.75 Bar

Water supply requirement: separate hot and cold inputs are required, each at a pressure of 1.5 - 3 Bar. NB: if the water pressure is below this range a twin negative head pump must be used to boost the hot and cold supply.

A pump must not be used on the output of a combi boiler.

Installation guidelines:

100mm clearance should be allowed for between the cabin roof and ceiling to allow adequate venting. It is essential that a fully qualified electrician and fully qualified plumber install the unit in accordance with current regulations. The product requires hard wiring into the mains.

Additional Installation Notes:
Electrical: This steam shower cabin requires 1 x 13amp electrical supply. It comes with a plug and RCD fitted, however we recommend you remove the plug and have the cabin installed to a fused spur. If you have an RCD fitted within your mains board you may also remove the RCD fitted to the shower flex.

Water: The cabin requires 1 x hot and 1 x cold water supply. The household water pipes should be fed to a point approximately 1 metre off the floor in the corner where the cabin is to be fitted. Balanced water pressure is required, between 2-3 bar. If using a gravity fed system we recommend you use a shower pump, to provide the required water pressures. We do not supply pumps. The shower cabin is a freestanding product and as such we would recommend your fitter does not fit the shower into locations that mean the cabin cannot be moved away from the wall if needed. The couplings on the cabin to connect to your water supply are standard 15mm compression fittings.

Some of our products arrive in large boxes, please ensure that you have enough room to manoeuvre the boxes and their contents to the installation location.

Write an online review and share your thoughts with other shoppers!

Be the first to review this product